
Aluminium wall copings and metal coping caps
Polyester-coated aluminium wall copings with the silicone-free ALU-CLICK® system
Request a quoteALU-CLICK®
The system's pieces






The product
Manufacturer of wall copings, metal coping caps and wall cappings in polyester-coated aluminium sheet, made to measure. The ALU-CLICK® system eliminates silicone and visible fixings for a clean, professional finish, and protects exterior walls from moisture and water infiltration.
+50 years
manufacturing
ISO 9001
Certified
+30.000
Projects completed
ALU-CLICK® System
How it works


Exploded viewBefore and after
This is how the ALU-CLICK® coping is fitted onto the wall with no silicone or visible fixings required.
0
Silicones
0
Visible fixings
1 click
Installation
Installations
On site









ALU-CLICK® Installation
No silicone, no visible fixings, no complications
The hidden fixing system allows for a clean, fast installation directly on site.
- 01
Set out
Line up the ALU-CLICK® plates along the top of the wall.
- 02
Fix
Fix each plate to the wall. The grooved plate comes with the bituminous seal already fitted.
- 03
Click
Fit the profile by rotating it from the outside in until it clicks into place.
- 04
Expansion
Leave 4 mm between pieces in summer and 8 mm in winter to allow for the aluminium's thermal expansion.
Available finishes
Anthracite Grey
RAL 7016
Natural
RAL 9006
White
RAL 9003
Dark Grey
RAL 7022
Technical specifications
- Material
- Polyester-coated aluminium
- Thickness
- 1.2 mm
- Coating
- 25 microns of polyester coating on both sides
- Corrosion resistance
- High corrosion resistance
- Fixing
- ALU-CLICK® system, no silicone or visible fixings
- Joints
- Watertight bituminous joints
- Gap between pieces
- 4 mm in summer, 8 mm in winter
- Base plate width
- 70 mm
- Certification
- ISO 9001:2015
Sizes and quotation
How to measure your wall and request a quote

- Width
- 70 to 600 mm, made to measure
- Side overhang
- 25 mm on each side of the wall
- Drop
- 45 mm on each side
- Piece length
- 3 m
- Standard finishes
- RAL 7016 · RAL 9006 · RAL 9003 · RAL 7022
What we need for your quote
- 1
Wall width in millimetres. If it varies between runs, add one line per width.
- 2
Linear metres of each run.
- 3
Number of corners (mitres) and free ends (end caps). If there are T-junctions, mention them in the comments.
- 4
RAL finish and the site's postcode.
If you have drawings, attach them to the form. We reply with a quote within 24 working hours.
Request a quoteComparison
ALU-CLICK® compared with other copings
What changes on site and over the life of the building, depending on the type of coping.
Swipe to compare →
| ALU-CLICK® | Screw-fixed metal | Concrete | Ceramic | |
|---|---|---|---|---|
| Installation | Dry fix: plate fixed to the wall, profile clicked into place | Screwed to the wall and sealed with silicone | Bedded in mortar (wet trade) | Bedded in mortar (wet trade) |
| Joints | Watertight bituminous joints, no silicone | Silicone beads exposed to the weather | Mortar | Mortar |
| Finish | Continuous, no visible fixings | Screws and silicone in view | Visible mortar joints; risk of efflorescence | Visible mortar joints |
| Maintenance | No resealing or repointing | Periodic resealing of the silicone | Joint repairs every 5–10 years | Joint repairs and replacement of broken pieces |
| Sizes | Made to measure, 70 to 600 mm wide | Depends on the manufacturer | Standard pieces; cut on site | Limited range; cut on site |
| Weight | Light | Light | Heavy; needs lifting equipment on the roof | Lighter than concrete, but brittle under impact and frost |
Concrete is the cheapest coping to buy. Aluminium makes up the difference with faster installation, no mortar or heavy equipment, and no joint maintenance.
Full comparisonAluminium wall copings
A made-to-measure metal coping for every wall top
Wall coping, coping cap, wall cap or parapet capping: different names for the same piece, the one that crowns the wall, sheds water away from it and keeps moisture out of the masonry. ALU-CLICK® is a polyester-coated aluminium coping made to the exact width of each wall, from 70 to 600 mm.
Flat-roof parapets
Capping for perimeter parapets, with corners and T-junctions solved by factory-made special pieces and no silicone at the joints.
Accessible roofs and terraces
Copings on accessible roofs, where the capping stays in full view and a continuous finish with no exposed screws makes the difference.
Detached houses
Parapets and eaves in new builds, in four standard RAL finishes so the capping fits the facade design.
Boundary walls and refurbishment
Boundary and exterior walls. Installed dry over the existing wall top, without removing the old capping: the usual way to replace worn concrete or ceramic copings.


